|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
The CT3 Carbide Tipped Hole Cutter is the best system for cutting sheet metal, including stainless steel up to 1/8" thick. Designed for professionals who want to do the job right the first time and get the lowest cost per hole. Available in a wide range of sizes from 5/8" to 1-3/8", and sets.
|
|
|
 |
|
|
|
|
|
|
|
 |
|
|
Newly improved CT5 carbide tipped hole cutters for cutting holes up to 3/16" thick in a variety of steels, aluminum, and nonferrous materials. Engineered for professional electricians, plumbers, and mechanics, new desgin improvements give 60% faster cutting speeds and 20% more holes.
|
|
 |
|
|
New carbide tip "pocket" for quicker chip extraction
|
|
 |
|
Stepped pilot drill reduces
tip impact
|
|
|
|
|
|
| Available from 9/16" to 5" diameter. A new range of plastic, hard wearing sets are available including conduit and electrical sets. |
|
|
Stronger, heat resistant spring ejects slugs fas
Sharper edges and improved tip angles for faster cutting and better chip clearance
|
|
|
|
|
|
|
|
 |
|
|
|
|
For cutting holes up to 1" thick in a cast iron, steels, aluminum, and non-ferrous materials. Designed for steel fabricators, welders, plumbers, and mechanics. Features "triple-edge" teeth and ejector spring for fast hole cutting and slug ejection.
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
For drilling lockset and deadbolt holes in steel doors. 2" depth of cut for drilling thick materials and 3/8" shanks. •The 2-1/8" diameter is designed specifically for door knob installation with the 1-1/2" designed for deadbolt installation. •Special tungsten carbide teeth enable the CT9 to cut stainless steel and other tough alloys while possessing excellent wear and heat resistance. A lockset featuring CT7 and CT9 cutters is available.
|
|
 |
 |
|
|
|
|
|
|
 |
|
|
|
Extends CT5 and CT7 hole cutters by 5". Precision machined tool steel. Can also be used to extend the reach of all 3/8" and 1/2" shank cutting tools.
|
|
|
 |
|
|
|
Dual 1/4" and 3/8" drill and drive chuck. This time saving accessory is ideal for using multi-step drills, CT3 sheet metal hole cutters, and many other hex-drive accessories.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ingenuity is the hallmark of what makes Champion's cutting tool solutions in demand by metalworking professionals the world over. Take for example our multi-step drills. It deburs and drills multiple size holes all in one step. Champion also carries combination drill & taps . These create holes and tap in a single operation.
|
|
|
 |
|
 click picture to enlarge |
|
|
|
 |
|
|
|
Application: junction boxes, switch boxes, metal studs, electrical appliances, lighting fixtures, PVC, Plexiglas, wood composition board and auto body repairFeatures: Automatically deburs drilled hole. Non-slipping point does not require a pilot hole and drills material up to 1/8" thick accurately and cleanly.
Available in 3Pc Kit (MSD-SET).
|
|
|
|
|
MSD-Hex Step Drills are an entire drill set in one cutting tool, and a must for all professional electricians and sheet metal contractors. The model MSD-Hex-1, for example, can drill thirteen diameters from 1/8" to 1/2".
|
|
|
|
 |
|
 |
|
 |
|
|
These drills feature two flutes(and two cutting edges) for fast drilling, and are Titanium Nitride coated for long life. They feature a 1/4" hex shank for use in our QCD "quick-change" driver, or for direct loading into impact-drive power tools.
|
|
|
 |
|
|
|
|
|
|
|
HEX SHANK COMBINATION DRILL & TAPS •Create the hole and thread in a single operation with no center drilling or countersinking. •DT22HEX neck design significantly reduces drill & tap breakage while the 135˚ split point permits both the hole and thread to be cut at high speeds. •Available in standard, metric and machine screw sizes. •Superior strength & durability is provided by high molybdenum high speed steel while the functional black and gold surface treatment holds lubricant for smoother drilling. •1/4" and 11/32" hex shank can be used in Champion QCD (quick change driver.) •Ideal for construction, electrical, maintenance, industrial and sutomotive applications. •Suitable for drilling and threading in aluminum, steel & stainless steel, bronze, brass, cast iron and zinc.
|
|
 |
 |
|
|
 |
|
|
|
|
|
Ideal for use in Mutli-Spindle heads with reversing capability and
in RB32-VSR magnetic drills.
|
|
Its taper neck design significantly reduces drill & tap breakage.
|
|
118° helical point permits rapid penetration.
|
|
Produces a class 2B fit. No special holders or collets required.
|
|
Available in metric, fractional and machine screw tap sizes.
|
|
|
|
 |
|
 |
|
| click picture to enlarge |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
 |
|
|
|
|
High speed steel hand taps are available in taper, plug and bottom style chamfers. Operated in tap wrenches or production tapping heads for threading a variety of materials. They are supplied in standard "H" limits that will provide the proper class of fit for the professional.
 |
|
|
|
|
|
|
|
|
 |
Commonly referred to as "gun taps", spiral point taps cut with a shearing action that shoots the chips ahead of the tap. Engineered specifically for tapping "through holes" or deep blind holes. Available in a range of sizes from 0-80 through 3/4-16.
|
|
|
|
| Champion dies, whether hex, rethreading or round, are chamfered on both sides, for easy starting from either side. Hex dies can be held in a vise across their flats, while round dies are used in die stocks. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
 |
A complete range of carbon steel taps and dies, for use in the shop, field or for general maintenance work. Hex dies for rethreading worn or rusty threads are a real time saver. Champion's Contractor Series tap and dies are available in standard (CS40P/CS60P) and metric (CS40MP/CS107P)  |
|
|
 |
|
|
 |
302 plug taps and CS30 hex dies
4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18,
5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20,
1/8-27 NPT pipe tap & die, die stock, 2 tap wrenches, screw pitch gauge, and screwdriver in molded plastic case.
Carbon taps and hex dies 3x.5, 3x.6, 4x.7, 4x.75, 5x.8, 5x.9,
6x1.0, 7x1.0, 8x1.25, 9x1.0, 9x1.25, 10x1.25, 10x1.5, 11x1.5, 12x1.5, 12x1.75; 1/8-28 BSP pipe tap, 1/8-28 BSP pipe die, die stocks, tap wrenches, metric screw pitch gauge and screwdriver.
|
|
|
|
|
|
|
 |
|
Contains 1 each: 302 plug tap/CS30 hex die 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10, 3/4-16; X1 #1 thru #5 screw extractors; 304-1/8NPT pipe die; 2001-4(#4-1/2), 2001-6(1/2-3/4) bar tap wrenches; 3292x1-7/16 die stocks; 2002-1(#4-1/4) T-handle tap wrench; screw pitch gauge; screwdriver
|
|
|
 |
|
|
|
Contains all items listed in CS60P plus 1 each: (Metric) 302M plug tap/CS30M hex die 3x.6, 4x.7, 4x.75, 5x.8, 5x.9, 6x1.0, 7x1.0, 8x1.25, 9x1.0, 9x1.25, 10x1.25, 10x1.5, 11x1.5, 12x1.5, 12x1.75, 14x1.25, 14x2.0, 16x1.5, 16x2.0, 18x1.5, 18x2.5; 304-1/8-28BSP, 304-1/4-19BSP pipe taps; CS30-1/8-28BSP, CS30-1/4-19BSP pipe dies; metric screw pitch gauge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Carbide burs are one of the most versatile metal working tools. Used in virtually every industry, burs are used in mold and pattern making, die sinking, tool making and maintenance. They are used widely in the automotive, aerospace, foundry, power station and engineering industries |
|
|
|
 |
|
 |
|
|
Producing unique carbide tools is a Champion specialty beginning with our versatile, titanium nitride coated, solid carbide burs offered in over 240 shapes and different sizes for both ferrous and non-ferrous materials.
 Champion solid carbide burs are manufactured in the USA from C2 tungsten carbide.
• machine ground for consistently high performance, • Solid carbide burs feature double cut flutes : for efficient machining of cast iron, steels, titanium, brass, bronze, and copper. • Non-ferrous burs feature deep, single cut flutes and are recommended for use on aluminum and softer alloys. • Automated brazing and fluting on state of the art equipment - assuring increased productivity, product consistency, and increased tool life.
Champion has the bur styles you need including, double cut burs, non-ferrous burs, miniature burs, and long series burs. Shapes available include SA, SB, SC, SD, SE, SF, SG, SH, SJ, SK, SL, SM, SN, and bur kits.
Our carbide tipped turning tools feature are engineered for high performance turning, boring, facing, grooving, forming, threading and chamfering.
|
|
|
|
|
 |
|
|
 |
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Champion carbide tipped tools are engineered for high performance turning, boring, facing, grooving, forming, threading and chamfering. Series 883(C2 carbide) is recommended for machining cast iron and non-ferrous materials. Series 370(C5, C6 carbide) is recommended for general purpose and heavy duty turning of steels, including stainless. Styles available include AR, AL, BR, BL, C, D, E, FR, FL, GR, GL, CTR, CTL, TSA, TSC, TSE, TRC, TRE, and TRG.
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Champion 600 series end mills are the perfect tool for general purpose milling of key ways, slots and pockets. They make short work of difficult machine shop tasks such as high production profiling and milling. Titanium nitride coated end mills feature increased surface hardness, durability and high lubricity. Two Flute solid carbide end mills are recommended in milling cast irons, non-ferrous light metals and plastics. The four flute design provides good wear resistance commonly used on more difficult to machine materials. Champion's cobalt end mills provide wear resistance to provide effective operation and longer tool life.
Download Adobe Acrobat Reader